Fant 9887 publikasjoner. Viser side 178 av 396:
Microplastics in Norwegian coastal areas, rivers, lakes and air (MIKRONOR1)
Norsk institutt for vannforskning
2022
2020
Microplastics and nanoplastics in the marine-atmosphere environment
The discovery of atmospheric micro(nano)plastic transport and ocean–atmosphere exchange points to a highly complex marine plastic cycle, with negative implications for human and ecosystem health. Yet, observations are currently limited. In this Perspective, we quantify the processes and fluxes of the marine-atmospheric micro(nano)plastic cycle, with the aim of highlighting the remaining unknowns in atmospheric micro(nano)plastic transport. Between 0.013 and 25 million metric tons per year of micro(nano)plastics are potentially being transported within the marine atmosphere and deposited in the oceans. However, the high uncertainty in these marine-atmospheric fluxes is related to data limitations and a lack of study intercomparability. To address the uncertainties and remaining knowledge gaps in the marine-atmospheric micro(nano)plastic cycle, we propose a future global marine-atmospheric micro(nano)plastic observation strategy, incorporating novel sampling methods and the creation of a comparable, harmonized and global data set. Together with long-term observations and intensive investigations, this strategy will help to define the trends in marine-atmospheric pollution and any responses to future policy and management actions.
2022
2018
2025
2017
2022
Microfibers (MF) are one of the major classes of microplastic found in the marine environment on a global scale. Very little is known about how they move and distribute from point sources such as wastewater effluents into the ocean. We chose Adventfjorden near the settlement of Longyearbyen on the Arctic Svalbard archipelago as a case study to investigate how microfibers emitted with untreated wastewater will distribute in the fjord, both on a spatial and temporal scale. Fiber abundance in the effluent was estimated from wastewater samples taken during two one-week periods in June and September 2017. Large emissions of MFs were detected, similar in scale to a modern WWTP serving 1.3 million people and providing evidence of the importance of untreated wastewater from small settlements as major local sources for MF emissions in the Arctic. Fiber movement and distribution in the fjord mapped using an online-coupled hydrodynamic-drift model (FVCOM-FABM). For parameterizing a wider spectrum of fibers from synthetic to wool, four different density classes of MFs, i.e., buoyant, neutral, sinking, and fast sinking fibers are introduced to the modeling framework. The results clearly show that fiber class has a large impact on the fiber distributions. Light fibers remained in the surface layers and left the fjord quickly with outgoing currents, while heavy fibers mostly sank to the bottom and deposited in the inner parts of the fjord and along the northern shore. A number of accumulation sites were identified within the fjord. The southern shore, in contrast, was much less affected, with low fiber concentrations throughout the modeling period. Fiber distributions were then compared with published pelagic and benthic fauna distributions in different seasons at selected stations around the fjord. The ratios of fibers to organisms showed a very wide range, indicating hot spots of encounter risk for pelagic and benthic biota. This approach, in combination with in-situ ground-truthing, can be instrumental in understanding microplastic pathways and fate in fjord systems and coastal areas and help authorities develop monitoring and mitigation strategies for microfiber and microplastic pollution in their local waters.
Frontiers Media S.A.
2021
Micronucleus assay applied to advanced in vitro lung models at ALI for nanotoxicity assessment
Elsevier
2021
2009
Microfluidic In Vitro Platform for (Nano)Safety and (Nano)Drug Efficiency Screening
Microfluidic technology is a valuable tool for realizing more in vitro models capturing cellular and organ level responses for rapid and animal‐free risk assessment of new chemicals and drugs. Microfluidic cell‐based devices allow high‐throughput screening and flexible automation while lowering costs and reagent consumption due to their miniaturization. There is a growing need for faster and animal‐free approaches for drug development and safety assessment of chemicals (Registration, Evaluation, Authorisation and Restriction of Chemical Substances, REACH). The work presented describes a microfluidic platform for in vivo‐like in vitro cell cultivation. It is equipped with a wafer‐based silicon chip including integrated electrodes and a microcavity. A proof‐of‐concept using different relevant cell models shows its suitability for label‐free assessment of cytotoxic effects. A miniaturized microscope within each module monitors cell morphology and proliferation. Electrodes integrated in the microfluidic channels allow the noninvasive monitoring of barrier integrity followed by a label‐free assessment of cytotoxic effects. Each microfluidic cell cultivation module can be operated individually or be interconnected in a flexible way. The interconnection of the different modules aims at simulation of the whole‐body exposure and response and can contribute to the replacement of animal testing in risk assessment studies in compliance with the 3Rs to replace, reduce, and refine animal experiments.
Wiley-VCH
2021
Microfibers (MF) are one of the major classes of microplastic found in the marine environment on a global scale. Very little is known about how they move and distribute from point sources such as wastewater effluents into the ocean. We chose Adventfjorden near the settlement of Longyearbyen on the Arctic Svalbard archipelago as a case study to investigate how microfibers emitted with untreated wastewater will distribute in the fjord, both on a spatial and temporal scale. Fiber abundance in the effluent was estimated from wastewater samples taken during two one-week periods in June and September 2017. Large emissions of MFs were detected, similar in scale to a modern WWTP serving 1.3 million people and providing evidence of the importance of untreated wastewater from small settlements as major local sources for MF emissions in the Arctic. Fiber movement and distribution in the fjord mapped using an online-coupled hydrodynamic-drift model (FVCOM-FABM). For parameterizing a wider spectrum of fibers from synthetic to wool, four different density classes of MFs, i.e., buoyant, neutral, sinking, and fast sinking fibers are introduced to the modeling framework. The results clearly show that fiber class has a large impact on the fiber distributions. Light fibers remained in the surface layers and left the fjord quickly with outgoing currents, while heavy fibers mostly sank to the bottom and deposited in the inner parts of the fjord and along the northern shore. A number of accumulation sites were identified within the fjord. The southern shore, in contrast, was much less affected, with low fiber concentrations throughout the modeling period. Fiber distributions were then compared with published pelagic and benthic fauna distributions in different seasons at selected stations around the fjord. The ratios of fibers to organisms showed a very wide range, indicating hot spots of encounter risk for pelagic and benthic biota. This approach, in combination with in-situ ground-truthing, can be instrumental in understanding microplastic pathways and fate in fjord systems and coastal areas and help authorities develop monitoring and mitigation strategies for microfiber and microplastic pollution in their local waters.
Frontiers Media S.A.
2021
MetVed v.2.0. Improvement and update of the MetVed emission model for residential wood combustion
This report presents the update of the MetVed-model (Grythe et al., 2019). Among the updates are new emission factors and several new species that include climate gases (CO2, CH4 and N2O). There is now a new parameter that describes the emission altitude and a new and improved time variation. Activity data has been updated to the most recent year (2019), which also has required updates to the model and model input variables. The largest update has been the holiday cabin emission module, which is an entirely new addition. Emissions from cabins differ in several ways from residential emissions. The most notable difference is that cabins are spread over more rural areas and are more dispersed than the residential dwellings. The model differentiates alpine and coastal cabins, which is an important distinction as a high density of cabins exists along the coast and they are mainly used during summer.
NILU
2020
METROPOLIS. Work Package WP3/Deliverable 4. On-line data presentation and data distribution. NILU OR
2004
1999
2015
Methods for estimating air pollutant emissions. PART 1: Review and source of input data. NILU OR
Denne rapporten er en del av utviklingen av Nasjonalt Beregningsverktøy for lokal luftkvalitet (NBV prosjektet). Arbeidet ble fokusert på metoder for å estimere utslipp og identifisere hovedkildene til nødvendige data for utslipp. Denne rapporten presenterer de mest vanlige metodene for å fastslå utslipp og inkluderer anbefalinger for fremtidig forbedring av utslippsberegninger. Hovedformålet med rapporten er å identifisere de mest relevante kildene til utslippsinformasjon og nødvendig krav til utslippsdata for modellering av luftkvalitet i norske byer og tettsteder.
2015