Fant 2676 publikasjoner. Viser side 13 av 268:
Reassessing the role of urban green space in air pollution control
The assumption that vegetation improves air quality is prevalent in scientific, popular, and political discourse. However, experimental and modeling studies show the effect of green space on air pollutant concentrations in urban settings is highly variable and context specific. We revisited the link between vegetation and air quality using satellite- derived changes of urban green space and air pollutant concentrations from 2,615 established monitoring stations over Europe and the United States. Between 2010 and 2019, stations recorded declines in ambient NO2, (particulate matter) PM10, and PM2.5 (average of −3.14% y−1), but not O3 (+0.5% y−1), pointing to the general success of recent policy interventions to restrict anthropogenic emissions. The effect size of total green space on air pollution was weak and highly variable, particularly at the street scale (15 to 60 m radius) where vegetation can restrict ventilation. However, when isolating changes in tree cover, we found a negative association with air pollution at borough to city scales (120 to 16,000 m) particularly for O3 and PM. The effect of green space was smaller than the pollutant deposition and dispersion effects of meteorological drivers including precipitation, humidity, and wind speed. When averaged across spatial scales, a one SD increase in green space resulted in a 0.8% (95% CI: −3.5 to 2%) decline in air pollution. Our findings suggest that while urban greening may improve air quality at the borough- to- city scale, the impact is moderate and may have detrimental street- level effects depending on aerodynamic factors like vegetation type and urban form.
vegetation | urban planning | green infrastructure | ecosystem service | public health
2024
The movement towards an animal-free testing approach for risk assessment represents a key paradigm shift in toxicology. Risk assessment of engineered and anthropogenic nanoscale materials (NM) is dependent on reliable hazard characterization, which requires validated test methods and models, and increasingly on mechanistic insights into the mode of action. The properties that make NMs so advantageous for a wide range of commercial and industrial applications also pose a challenge when it comes to safety testing under in vitro and in chemico experimental settings. Their large reactive surface area makes NMs prone to interactions with assay reagents, readout signals, or intermediate steps of many test assays, leading to the potential for biased results and data inconsistencies, collectively referred to as interferences. Therefore, methods and protocols developed and validated for conventional chemicals often require adaptation and checking for reliability in NMs' toxicity assessment. This review presents the collected scientific knowledge on NMs-induced interferences for the most common in vitro toxicity assays and methods related to cytotoxicity, oxidative stress and inflammatory response evaluation. Our analysis of existing scientific literature showed that the challenge of NMs-induced interference was not explicitly addressed in more than 90% of the papers published up to 2014 reporting the safety and toxicity of NMs. In later years, increasing number of studies tackled the interference challenge in toxicity testing of NMs, which initiated exhaustive work on standardization and validation of existing regulatory-relevant in vitro test protocols and guidelines. Due to the specificity of the different NMs and the range of ways they can potentially interfere with in vitro assays, interference and fit-for purpose controls should be included for each NM type and method applied, unless label-free assays are selected. Here, we provide a decision tree to guide researchers on how to design experiments to avoid interferences during in vitro testing by taking appropriate mitigation actions and how to include proper interference controls in their experimental design where complete avoidance is not possible. The application of this decision tree will improve the reliability, comparability and reusability of in vitro toxicity data on engineered NMs or ENMs, increasing the relevance of in silico hazard data for use in risk assessment and in science-based risk governance of NMs. The approach is applicable more broadly also, to advanced materials and to hazard assessment of anthropogenic nanoscale materials such as microplastic and tyre-wear particles.
2024
2024
Understanding individual heat exposure through interdisciplinary research on thermoception
Extreme heat events are more frequent and more intense globally due to climate change. The urban environment is an additional factor enhancing the effects of heat. Adults above 65 years old are especially at risk due to their poorer health, physiology and socio-economic situation. Yet, there is limited knowledge about their experiences of summer heat, their actual heat exposure and how they negotiate their thermal comfort through different adaptation practices. In conventional research on heat exposure and thermal comfort, very little attention is given to individual behaviour and subjective experiences. To understand how older adults feel the heat in the city we study their thermoception, which we conceptualise as an embodied knowledge about bodily sensations, thermal environments and adjustments to heat. This article stems from interdisciplinary research conducted in Warsaw and Madrid in the summers of 2021–2022. We combine and juxtapose data from ethnographic research and from physical measurements of temperature gathered in people’s homes, to show on a microscale how we can study and understand the diversity in individual heat exposure more holistically. We demonstrate that to understand the consequences of heat for vulnerable populations it is crucial to study thermoception, the subjective experiences of heat, in addition to analysing their thermal environments. With the use of a unique methodology, this article shows how similar weather conditions are experienced differently by people from the same cities, depending on the materiality of their dwellings, availability of cooling devices, as well as everyday habits and their individual bodies. We discuss the social, material and temporal adjustments participants made to deal with heat, to showcase their agency in affecting their individual heat exposure. The article emphasises the role of social sciences and qualitative methods in research on individual heat exposure and argues for the co-production of knowledge on the topic.
2024
Testing ethical impact assessment for nano risk governance
Risk governance of nanomaterials and nanotechnologies has been traditionally mainly limited to risk assessment, risk management and life cycle assessment. Recent approaches have experimented with widening the scope and including economic, social, and ethical aspects. This paper reports on tests and stakeholder feedback on fine-tuning the use of ethical impact assessment guidelines (RiskGONE D3.6) and online tools adapting the CEN Workshop Agreement part 2 CWA 17145-2:2017 (E)) to support risk governance of nanomaterials, in the RiskGONE project. The EIA guidelines and tools are intended to be used as one module in a multicriteria decision support framework for risk governance of nanomaterials, but may also be used for a stand-alone ethical impact assessment.
Nanomaterials are new forms of materials with structures at sizes between 1 and 100 nanometres (a millionth of a millimetre). They can be particles, tubes, platelets or other shaped structures. Nanomaterials can be applied in many different products, ranging from medicine to solar panels. Researchers, governments and stakeholders have been concerned with potential risks for human health and the environment for decades. Also, how nanomaterials behave during the production, use and waste processing of the products they are included in has been investigated in Life Cycle Analysis. However, ethical issues which may be raised by the use of nanomaterials in those products are usually not investigated. In this article, the procedure for an ethical impact assessment described in the CEN Workshop Agreement CWA 17145-@:2017 (E) is adapted to nanomaterials. Users who want to perform this assessment are guided through the procedure by online tools. The guidelines and tools were tested on several case studies and discussed with stakeholders, who commented on the criteria which should be used and on who could use the tools. This results in recommendations for improving the guidelines and online tools.
2024
Background
Prioritisation of chemical pollutants is a major challenge for environmental managers and decision-makers alike, which is essential to help focus the limited resources available for monitoring and mitigation actions on the most relevant chemicals. This study extends the original NORMAN prioritisation scheme beyond target chemicals, presenting the integration of semi-quantitative data from retrospective suspect screening and expansion of existing exposure and risk indicators. The scheme utilises data retrieved automatically from the NORMAN Database System (NDS), including candidate substances for prioritisation, target and suspect screening data, ecotoxicological effect data, physico-chemical data and other properties. Two complementary workflows using target and suspect screening monitoring data are applied to first group the substances into six action categories and then rank the substances using exposure, hazard and risk indicators. The results from the ‘target’ and ‘suspect screening’ workflows can then be combined as multiple lines of evidence to support decision-making on regulatory and research actions.
Results
As a proof-of-concept, the new scheme was applied to a combined dataset of target and suspect screening data. To this end, > 65,000 substances on the NDS, of which 2579 substances supported by target wastewater monitoring data, were retrospectively screened in 84 effluent wastewater samples, totalling > 11 million data points. The final prioritisation results identified 677 substances as high priority for further actions, 7455 as medium priority and 326 with potentially lower priority for actions. Among the remaining substances, ca. 37,000 substances should be considered of medium priority with uncertainty, while it was not possible to conclude for 19,000 substances due to insufficient information from target monitoring and uncertainty in the identification from suspect screening. A high degree of agreement was observed between the categories assigned via target analysis and suspect screening-based prioritisation. Suspect screening was a valuable complementary approach to target analysis, helping to prioritise thousands of substances that are insufficiently investigated in current monitoring programmes.
Conclusions
This updated prioritisation workflow responds to the increasing use of suspect screening techniques. It can be adapted to different environmental compartments and can support regulatory obligations, including the identification of specific pollutants in river basins and the marine environments, as well as the confirmation of environmental occurrence levels predicted by modelling tools.
2024
2024
Emission ensemble approach to improve the development of multi-scale emission inventories
Many studies have shown that emission inventories are one of the inputs with the most critical influences on the results of air quality modelling. Comparing emission inventories among themselves is, therefore, essential to build confidence in emission estimates. In this work, we extend the approach of Thunis et al. (2022) to compare emission inventories by building a benchmark that serves as a reference for comparisons. This benchmark is an ensemble that is based on three state-of-the-art EU-wide inventories: CAMS-REG, EMEP and EDGAR. The ensemble-based methodology screens differences between inventories and the ensemble. It excludes differences that are not relevant and identifies among the remaining ones those that need special attention. We applied the ensemble-based screening to both an EU-wide and a local (Poland) inventory.
The EU-wide analysis highlighted a large number of inconsistencies. While the origin of some differences between EDGAR and the ensemble can be identified, their magnitude remains to be explained. These differences mostly occur for SO2 (sulfur oxides), PM (particulate matter) and NMVOC (non-methane volatile organic carbon) for the industrial and residential sectors and reach a factor of 10 in some instances. Spatial inconsistencies mostly occur for the industry and other sectors.
At the local scale, inconsistencies relate mostly to differences in country sectorial shares that result from different sectors/activities being accounted for in the two types of inventories. This is explained by the fact that some emission sources are omitted in the local inventory due to a lack of appropriate geographically allocated activity data. We identified sectors and pollutants for which discussion between local and EU-wide emission compilers would be needed in order to reduce the magnitude of the observed differences (e.g. in the residential and industrial sectors).
The ensemble-based screening proved to be a useful approach to spot inconsistencies by reducing the number of necessary inventory comparisons. With the progressive resolution of inconsistencies and associated inventory improvements, the ensemble will improve. In this sense, we see the ensemble as a useful tool to motivate the community around a single common benchmark and monitor progress towards the improvement of regionally and locally developed emission inventories.
2024
Accurate modeling of ash clouds from volcanic eruptions requires knowledge about the eruption source parameters including eruption onset, duration, mass eruption rates, particle size distribution, and vertical-emission profiles. However, most of these parameters are unknown and must be estimated somehow. Some are estimated based on observed correlations and known volcano parameters. However, a more accurate estimate is often needed to bring the model into closer agreement with observations.
This paper describes the inversion procedure implemented at the Norwegian Meteorological Institute for estimating ash emission rates from retrieved satellite ash column amounts and a priori knowledge. The overall procedure consists of five stages: (1) generate a priori emission estimates, (2) run forward simulations with a set of unit emission profiles, (3) collocate/match observations with emission simulations, (4) build system of linear equations, and (5) solve overdetermined systems. We go through the mathematical foundations for the inversion procedure, performance for synthetic cases, and performance for real-world cases. The novelties of this paper include a memory efficient formulation of the inversion problem, a detailed description and illustrations of the mathematical formulations, evaluation of the inversion method using synthetic known-truth data as well as real data, and inclusion of observations of ash cloud-top height. The source code used in this work is freely available under an open-source license and is able to be used for other similar applications.
2024
2024