Fant 9747 publikasjoner. Viser side 377 av 390:
2024
2024
Fine particulate matter (PM2.5) is a key air quality indicator due to its adverse health impacts. Accurate PM2.5 assessment requires high-resolution (e.g., atleast 1 km) daily data, yet current methods face challenges in balancing accuracy, coverage, and resolution. Chemical transport models such as those from the Copernicus Atmosphere Monitoring Service (CAMS) offer continuous data but their relatively coarse resolution can introduce uncertainties. Here we present a synergistic Machine Learning (ML)-based approach called S-MESH (Satellite and ML-based Estimation of Surface air quality at High resolution) for estimating daily surface PM2.5 over Europe at 1 km spatial resolution and demonstrate its performance for the years 2021 and 2022. The approach enhances and downscales the CAMS regional ensemble 24 h PM2.5 forecast by training a stacked XGBoost model against station observations, effectively integrating satellite-derived data and modeled meteorological variables. Overall, against station observations, S-MESH (mean absolute error (MAE) of 3.54 μg/m3) shows higher accuracy than the CAMS forecast (MAE of 4.18 μg/m3) and is approaching the accuracy of the CAMS regional interim reanalysis (MAE of 3.21 μg/m3), while exhibiting a significantly reduced mean bias (MB of −0.3 μg/m3 vs. −1.5 μg/m3 for the reanalysis). At the same time, S-MESH requires substantially less computational resources and processing time. At concentrations >20 μg/m3, S-MESH outperforms the reanalysis (MB of −7.3 μg/m3 and -10.3 μg/m3 respectively), and reliably captures high pollution events in both space and time. In the eastern study area, where the reanalysis often underestimates, S-MESH better captures high levels of PM2.5 mostly from residential heating. S-MESH effectively tracks day-to-day variability, with a temporal relative absolute error of 5% (reanalysis 10%). Exhibiting good performance at high pollution events coupled with its high spatial resolution and rapid estimation speed, S-MESH can be highly relevant for air quality assessments where both resolution and timeliness are critical.
Elsevier
2024
Statusrapport 2024. Nasjonalt referanselaboratorium for luftkvalitetsmålinger
Denne rapporten oppsummerer oppgavene til Nasjonalt referanselaboratorium for luftkvalitetsmålinger (NRL), delkontrakt 1b, for første halvår 2024.
NILU
2024
A reliable determination of equivalent black carbon (eBC) mass concentrations derived from filter absorption photometers (FAPs) measurements depends on the appropriate quantification of the mass absorption cross-section (MAC) for converting the absorption coefficient (babs) to eBC. This study investigates the spatial–temporal variability of the MAC obtained from simultaneous elemental carbon (EC) and babs measurements performed at 22 sites. We compared different methodologies for retrieving eBC integrating different options for calculating MAC including: locally derived, median value calculated from 22 sites, and site-specific rolling MAC. The eBC concentrations that underwent correction using these methods were identified as LeBC (local MAC), MeBC (median MAC), and ReBC (Rolling MAC) respectively. Pronounced differences (up to more than 50 %) were observed between eBC as directly provided by FAPs (NeBC; Nominal instrumental MAC) and ReBC due to the differences observed between the experimental and nominal MAC values. The median MAC was 7.8 ± 3.4 m2 g-1 from 12 aethalometers at 880 nm, and 10.6 ± 4.7 m2 g-1 from 10 MAAPs at 637 nm. The experimental MAC showed significant site and seasonal dependencies, with heterogeneous patterns between summer and winter in different regions. In addition, long-term trend analysis revealed statistically significant (s.s.) decreasing trends in EC. Interestingly, we showed that the corresponding corrected eBC trends are not independent of the way eBC is calculated due to the variability of MAC. NeBC and EC decreasing trends were consistent at sites with no significant trend in experimental MAC. Conversely, where MAC showed s.s. trend, the NeBC and EC trends were not consistent while ReBC concentration followed the same pattern as EC. These results underscore the importance of accounting for MAC variations when deriving eBC measurements from FAPs and emphasize the necessity of incorporating EC observations to constrain the uncertainty associated with eBC.
Elsevier
2024
2024
Surface-Bioengineered Extracellular Vesicles Seeking Molecular Biotargets in Lung Cancer Cells
Personalized medicine is a new approach to modern oncology. Here, to facilitate the application of extracellular vesicles (EVs) derived from lung cancer cells as potent advanced therapy medicinal products in lung cancer, the EV membrane was functionalized with a specific ligand for targeting purposes. In this role, the most effective heptapeptide in binding to lung cancer cells (PTHTRWA) was used. The functionalization process of EV surface was performed through the C- or N-terminal end of the heptapeptide. To prove the activity of the EVs functionalized with PTHTRWA, both a model of lipid membrane mimicking normal and cancerous cell membranes as well as human adenocarcinomic alveolar basal epithelial cells (A549) and human normal bronchial epithelial cells (BEAS-2B) have been exposed to these bioconstructs. Magnetic resonance imaging (MRI) showed that the as-bioengineered PTHTRWA-EVs loaded with superparamagnetic iron oxide nanoparticle (SPIO) cargos reach the growing tumor when dosed intravenously in NUDE Balb/c mice bearing A549 cancer. Molecular dynamics (MD) in silico studies elucidated a high affinity of the synthesized peptide to the α5β1 integrin. Preclinical safety assays did not evidence any cytotoxic or genotoxic effects of the PTHTRWA-bioengineered EVs.
American Chemical Society (ACS)
2024
Short-, medium-, and long-chain chlorinated paraffins (CPs) (SCCPs, MCCPs, and LCCPs) and dechloranes are chemicals of emerging concern; however, little is known of their bioaccumulative potential compared to legacy contaminants in marine mammals. Here, we analyzed SCCPs, MCCPs, LCCPs, 7 dechloranes, 4 emerging brominated flame retardants, and 64 legacy contaminants, including polychlorinated biphenyls (PCBs), in the blubber of 46 individual marine mammals, representing 10 species, from Norway. Dietary niche was modeled based on stable isotopes of nitrogen and carbon in the skin/muscle to assess the contaminant accumulation in relation to diet. SCCPs and dechlorane-602 were strongly positively correlated with legacy contaminants and highest in killer (Orcinus orca) and sperm (Physeter macrocephalus) whales (median SCCPs: 160 ng/g lw; 230 ng/g lw and median dechlorane-602: 3.8 ng/g lw; 2.0 ng/g lw, respectively). In contrast, MCCPs and LCCPs were only weakly correlated to recalcitrant legacy contaminants and were highest in common minke whales (Balaenoptera acutorostrata; median MCCPs: 480 ng/g lw and LCCPs: 240 ng/g lw). The total contaminant load in all species was dominated by PCBs and legacy chlorinated pesticides (63–98%), and MCCPs dominated the total CP load (42–68%, except 11% in the long-finned pilot whale Globicephala melas). Surprisingly, we found no relation between contaminant concentrations and dietary niche, suggesting that other large species differences may be masking effects of diet such as lifespan or biotransformation and elimination capacities. CP and dechlorane concentrations were higher than in other marine mammals from the (sub)Arctic, and they were present in a killer whale neonate, indicating bioaccumulative properties and a potential for maternal transfer in these predominantly unregulated chemicals.
2024
2024
Metal pollution is a global environmental issue with adverse biological effects on wildlife. Long-term studies that span declines in metal emissions due to regulation, resulting in varying levels of environmental contamination, are therefore well-suited to investigate effects of toxic metals, while also facilitating robust analysis by incorporating fluctuating environmental conditions and food availability. Here, we examined a resident population of tawny owls in Norway between 1986 and 2019. Tail feathers from females were collected annually, resulting in over 1000 feathers. Each feather served as an archive of local environmental conditions during molt, including the presence of metals, and their dietary ecology, proxied by stable isotopes of nitrogen (δ15N) and carbon (δ13C), as well as corticosterone levels (CORTf), the primary avian glucocorticoid and a measure of physiological stress. We analyzed feathers to examine how exposure to toxic metal(loid)s (Al, As, Cd, Hg, and Pb) and variability in dietary proxies modulate CORTf. Using structural equation modelling, we found that increased Al concentrations and δ15N values, linked directly to increased CORTf. In opposite, we found that increased Hg concentrations and δ13C related to decreased CORTf concentrations. δ15N was indirectly linked to CORTf through Al and Hg, while δ13C was indirectly linked to CORTf through Hg. This supports our hypothesis that metal exposure and dietary ecology may individually or jointly influence physiological stress. Notably, our results suggest that dietary ecology has the potential to mediate the impact of metals on CORTf, highlighting the importance of considering multiple variables, direct and indirect effects, when assessing stress in wildlife. In conclusion, feathers represent an excellent non-destructive biomonitoring strategy in avian wildlife, providing valuable insights not easily accessible using other methods. Further research is warranted to fully comprehend implications of alterations in CORTf on the tawny owl's health and fitness.
Elsevier
2024
Climate health risks to children and adolescents: exposures, policy and practice interventions
ETC/HE
2024
2024
In the framework of the Forum for Air Quality Modelling in Europe (FAIRMODE), a modelling intercomparison exercise for computing NO2 long-term average concentrations in urban districts with a very high spatial resolution was carried out. This exercise was undertaken for a district of Antwerp (Belgium). Air quality data includes data recorded in air quality monitoring stations and 73 passive samplers deployed during one-month period in 2016. The modelling domain was 800 × 800 m2. Nine modelling teams participated in this exercise providing results from fifteen different modelling applications based on different kinds of model approaches (CFD – Computational Fluid Dynamics-, Lagrangian, Gaussian, and Artificial Intelligence). Some approaches consisted of models running the complete one-month period on an hourly basis, but most others used a scenario approach, which relies on simulations of scenarios representative of wind conditions combined with post-processing to retrieve a one-month average of NO2 concentrations.
The objective of this study is to evaluate what type of modelling system is better suited to get a good estimate of long-term averages in complex urban districts. This is very important for air quality assessment under the European ambient air quality directives. The time evolution of NO2 hourly concentrations during a day of relative high pollution was rather well estimated by all models. Relative to high resolution spatial distribution of one-month NO2 averaged concentrations, Gaussian models were not able to give detailed information, unless they include building data and street-canyon parameterizations. The models that account for complex urban geometries (i.e. CFD, Lagrangian, and AI models) appear to provide better estimates of the spatial distribution of one-month NO2 averages concentrations in the urban canopy. Approaches based on steady CFD-RANS (Reynolds Averaged Navier Stokes) model simulations of meteorological scenarios seem to provide good results with similar quality to those obtained with an unsteady one-month period CFD-RANS simulations.
Elsevier
2024
2024