Fant 2715 publikasjoner. Viser side 82 av 272:
Nanomaterial grouping: Existing approaches and future recommendations
The physico-chemical properties of manufactured nanomaterials (NMs) can be fine-tuned to obtain different functionalities addressing the needs of specific industrial applications. The physico-chemical properties of NMs also drive their biological interactions. Accordingly, each NM requires an adequate physico-chemical characterization and potentially an extensive and time-consuming (eco)toxicological assessment, depending on regulatory requirements. Grouping and read-across approaches, which have already been established for chemicals in general, are based on similarity between substances and can be used to fill data gaps without performing additional testing. Available data on “source” chemicals are thus used to predict the fate, toxicokinetics and/or (eco)toxicity of structurally similar “target” chemical(s). For NMs similar approaches are only beginning to emerge and several challenges remain, including the identification of the most relevant physico-chemical properties for supporting the claim of similarity. In general, NMs require additional parameters for a proper physico-chemical description. Furthermore, some parameters change during a NM's life cycle, suggesting that also the toxicological profile may change.
This paper compares existing concepts for NM grouping, considering their underlying basic principles and criteria as well as their applicability for regulatory and other purposes. Perspectives and recommendations based on experiences obtained during the EU Horizon 2020 project NanoReg2 are presented. These include, for instance, the importance of harmonized data storage systems, the application of harmonized scoring systems for comparing biological responses, and the use of high-throughput and other screening approaches. We also include references to other ongoing EU projects addressing some of these challenges.
2019
2019
2019
2019
A combination of local (i.e. firefighting training facilities) and remote sources (i.e., long-range transport) are assumed to be responsible for the occurrence of per- and polyfluoroalkyl substances (PFASs) in Svalbard (Norwegian Arctic). However, no systematic elucidation of local PFASs sources have been conducted yet. Therefore, a survey was performed aiming at identifying local PFASs pollution sources on the island of Spitsbergen (Svalbard, Norway). Soil, fresh water (lake, draining rivers), sea water, melt-water run-off, surface snow and coastal sediment samples were collected from Longyearbyen (Norwegian mining town), Ny-Ålesund (research facility) and the Lake Linnévatnet area (background site) during several campaigns (2014-2016) and analysed for 14 individual target PFASs. For background site (Linnévatnet area, sampling during April to June 2015), ∑PFAS levels ranged from 0.4 – 4 ng/L in surface lake water (n = 20). PFAS in melt water from the contributing glaciers showed similar concentrations (~4 ng/L, n = 2). The short chain perfluorobutanoate (PFBA) was predominant in lake water (60-80% of the ∑PFASs), meltwater (20-30 %) and run-off water (40 %). Long range transport is assumed to be the major PFAS source. In Longyearbyen, 5 water samples (i.e. 2 seawater, 3 run-off) were collected near the local firefighting training site (FFTS) in November 2014 and June 2015, respectively. The highest PFAS levels were found in FFTS melt water run-off (118 ng/L). PFOS was the most abundant compound in the FFTS meltwater run-off (53 – 58 % PFASs). At the research station Ny-Ålesund, sea water (n = 6), soil (n = 9) and fresh water (n = 10) were collected in June 2016. Low ∑PFAS concentrations were determined for sea water (5 - 6 ng/L), whereas high ∑PFAS concentrations were found in run-off water (113 – 119 ng/L) and soil (211 – 800 ng/g dry weight (dw)) collected close to the local FFTS. In addition, high ∑PFAS levels (127 ng/L) were also found in fresh water from lake Solvatnet close to former sewage treatment facility. Overall, at both FFTS affected sites (soil, water), PFOS was the most abundant compound (60 – 69% of ∑PFASs). FFTS and landfill locations were identified as major PFASs sources for Svalbard settlements.
2018
Sudden Stratospheric Warmings (SSW) affect the chemistry and dynamics of the middle atmosphere. Major warmings occur roughly every second winter in the Northern Hemisphere (NH), but has only been observed once in the Southern Hemisphere (SH), during the Antarctic winter of 2002. Observations by the Global Ozone Monitoring by Occultation of Stars (GOMOS, an instrument on board Envisat) during this rare event, show a 40% increase of ozone in the nighttime secondary ozone layer at subpolar latitudes compared to non-SSW years. This study investigates the cause of the mesospheric nighttime ozone increase, using the National Center for Atmospheric Research (NCAR) Whole Atmosphere Community Climate Model with specified dynamics (SD-WACCM). The 2002 SH winter was characterized by several reductions of the strength of the polar night jet in the upper stratosphere before the jet reversed completely, marking the onset of the major SSW. At the time of these wind reductions, corresponding episodic increases can be seen in the modelled nighttime secondary ozone layer. This ozone increase is attributed largely to enhanced upwelling and the associated cooling of the altitude region in conjunction with the wind reversal. This is in correspondence to similar studies of SSW induced ozone enhancements in NH. But unlike its NH counterpart, the SH secondary ozone layer appeared to be impacted less by episodic variations in atomic hydrogen. Seasonally decreasing atomic hydrogen plays however a larger role in SH compared to NH.
2018
2018
An Infrastructural Analysis of a Crowdsourcing Tool for Environmental Research
In this paper, we adopt information infrastructure design principles and concepts from the theory of critical mass to analyze and evaluate the socio-technical conditions that hindered the successful bootstrapping processes of a crowdsourcing tool for environmental research. The crowdsourcing tool was designed to improve the estimation of emissions from burning wood for residential heating in urban areas in Norway by collecting geolocation data on wood consumption and stove types. Our analysis identifies three groups of users, namely scientists, wood consumers (end users), and key stakeholders, that the IT capability of the tool needs to support. At this stage, we determined that the tool was more useful to the scientists than the other two groups, which was attributed to its low uptake. We uncovered various underlying issues through further analysis of means by which the tool becomes useful to key stakeholders. One particular issue concerned the tension between existing data collection practices, which are based on statistical methods, and the nature of crowdsourcing, which is based on the principle of open call with no sampling techniques. From our analysis, we concluded that developing crowdsourcing tools for research requires increasing the tool’s benefits for key stakeholders by addressing these underlying issues. Inferring from the theory of critical mass for collective action, we recommend that developers of crowdsourcing tools include a function that allows users to view the contributions of other users.
2018
While feathers have been successfully validated for monitoring of internal concentrations of heavy metals and legacy persistent organic pollutants (POPs), less is known about their suitability for monitoring ofemerging con- taminants (ECs). Our study presents a broad investigation ofboth legacy POPs and ECs in non-destructivematri- ces from a bird of prey. Plasma and feathers were sampled in 2015 and 2016 from 70 whitetailed eagle (Haliaeetus albicilla) nestlings from two archipelagos in Norway. Preen oil was also sampled in 2016. Samples were analysed for POPs (polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and organochlorinated pesticides (OCPs)) and ECs (per- and polyfluoroalkyl substances (PFASs), dechlorane plus (DPs), phosphate and novel brominated flame retardants (PFRs and NBFRs)). A total of nine PCBs, three OCPs, one PBDE and one PFAS were detected in over 50% of the plasma and feather samples within each sampling year and location. Significant and positive correlationswere found between plasma, feathers and preen oil concentrations of legacy POPs and confirm the findings ofprevious research on the usefulness of these matrices for non-destructive mon- itoring. In contrast, the suitability of feathers for ECs seems to be limited. Detection frequencies (DF) of PFASs were higher in plasma (mean DF: 78%) than in feathers (mean DF: 38%). Only perfluoroundecanoic acid could be quantified in over 50% ofboth plasma and feather samples, yet their correlation was poor and not significant. The detection frequencies of PFRs, NBFRs and DPs were very low in plasma (mean DF: 1–13%), compared to feathers (meanDF: 10–57%). Thismay suggest external atmospheric deposition, rapid internal biotransformation or excretion of these compounds. Accordingly, we suggest prioritising plasma for PFASs analyses, while the sources of PFRs, NBFRs and DPs in feathers and plasma need further investigation.
2018
Methane at Svalbard and over the European Arctic Ocean
Methane (CH<sub>4</sub>) is a powerful greenhouse gas. Its atmospheric mixing ratios have been increasing since 2005. Therefore, quantification of CH<sub>4</sub> sources is essential for effective climate change mitigation. Here we report observations of the CH<sub>4</sub> mixing ratios measured at the Zeppelin Observatory (Svalbard) in the Arctic and aboard the research vessel (RV) Helmer Hanssen over the Arctic Ocean from June 2014 to December 2016, as well as the long-term CH<sub>4</sub> trend measured at the Zeppelin Observatory from 2001 to 2017. We investigated areas over the European Arctic Ocean to identify possible hotspot regions emitting CH<sub>4</sub> from the ocean to the atmosphere, and used state-of-the-art modelling (FLEXPART) combined with updated emission inventories to identify CH<sub>4</sub> sources. Furthermore, we collected air samples in the region as well as samples of gas hydrates, obtained from the sea floor, which we analysed using a new technique whereby hydrate gases are sampled directly into evacuated canisters. Using this new methodology, we evaluated the suitability of ethane and isotopic signatures (δ<sup>13</sup>C in CH<sub>4</sub>) as tracers for ocean-to-atmosphere CH<sub>4</sub> emission. We found that the average methane / light hydrocarbon (ethane and propane) ratio is an order of magnitude higher for the same sediment samples using our new methodology compared to previously reported values, 2379.95 vs. 460.06, respectively. Meanwhile, we show that the mean atmospheric CH<sub>4</sub> mixing ratio in the Arctic increased by 5.9±0.38 parts per billion by volume (ppb) per year (yr<sup>−1</sup>) from 2001 to 2017 and ∼8 pbb yr<sup>−1</sup> since 2008, similar to the global trend of ∼ 7–8 ppb yr<sup>−1</sup>. Most large excursions from the baseline CH<sub>4</sub> mixing ratio over the European Arctic Ocean are due to long-range transport from land-based sources, lending confidence to the present inventories for high-latitude CH<sub>4</sub> emissions. However, we also identify a potential hotspot region with ocean–atmosphere CH<sub>4</sub> flux north of Svalbard (80.4∘ N, 12.8∘ E) of up to 26 nmol m<sup>−2</sup>s<sup>−1</sup> from a large mixing ratio increase at the location of 30 ppb. Since this flux is consistent with previous constraints (both spatially and temporally), there is no evidence that the area of interest north of Svalbard is unique in the context of the wider Arctic. Rather, because the meteorology at the time of the observation was unique in the context of the measurement time series, we obtained over the short course of the episode measurements highly sensitive to emissions over an active seep site, without sensitivity to land-based emissions.
2018