Fant 414 publikasjoner. Viser side 11 av 18:
Maximizing output from non-target screening
The purpose of this project is to dig deeper into the data material already generated in the Suspect screening in Nordic countries: Point sources in city areas (TemaNord: 2017:561) to further optimize the benefits of the major work that has already been done. Samples (effluent, sediment, and biota) from all of the Nordic countries were carefully selected, sampled and analysed by a consortium of some of the Nordic region’s most experienced scientific groups in analyses of emerging environmental contaminants. But where perhaps the full potential of the generated data is still to be realized. This project will try to further identify and describe the substances already detected, to be able to better understand what substances we in modern Nordic societies release into the sea via our wastewater.
Nordic Council of Ministers
2021
Grenseområdene Norge-Russland. Luft- og nedbørkvalitet 2020.
Smelteverkene i nordvest-Russland slapp ut store mengder svoveldioksid (SO2) og tungmetaller. Utslippene påvirket luft- og nedbørkvalitet i grenseområdene. Miljøovervåkingen viser at grenseverdier for SO2 er overholdt i kalenderåret 2020, samt for vinter 2019/20. Smelteverket i Nikel stengte ned 23. desember 2020 og dette er ventet å gi stor nedgang i
forurensningen i grenseområdene. Målsettingsverdier for Ni, As og Cd er overholdt.
NILU
2021
PAH measurements at Lista. January 2020 – December 2020.
On behalf of Aluminiumindustriens Miljøsekretariat (AMS) and Alcoa Lista, NILU – Norwegian institute for air research has
conducted a sampling campaign in the surroundings of the Alcoa Lista aluminium smelter in order to update the knowledge on PAH-concentrations around the smelter today. Samples were taken in the period January – December 2020 and
analysed for particle bound PAHs. As a consequence of reduced emissions compared to earlier measurements, the ambient
concentrations of benzo(a)pyrene (BaP) were reduced. BaP had an annual average concentration below the target value at
both sampling sites. At Huseby, the lower assessment threshold was exceeded. PAH-levels in the area were similar to those observed in Norwegian cities.
NILU
2021
An update on low-cost sensors for the measurement of atmospheric composition
The report reflects on the state of the art in terms of accuracy, reliability and reproducibility of different sensors used for the measurements of reactive and greenhouse gases, and aerosols, along with the key analytical principles and what has been learned so far about low-cost sensors from both laboratory studies and real-world tests (up to August 2020). In some cases, scientific literature that had been accepted, but not yet published in a final form, was included in this review. Some national and international government documents were also included in this synthesis. The report includes eight distinct sections, including an Introduction to the Report, Main Principles and Components, Evaluation Activities, Sensor Performance, Communicating LCS to Society, and Expert Consensus and Advice. Communicating LCS to Society is a new section to the original 2018 report and includes a consensus viewpoint on strategies for communicating LCS data and technologies more broadly to the lay public. This report also includes a set of specific expert consensus recommendations for LCS users across different user groups.
WMO
2021
Fjernmåling av metanutslipp ved bruk av Sentinel-5P: en mulighetsstudie
Rapporten beskriver hvilke muligheter Sentinel-5P kan gi med tanke på å utvikle produkter for årlige nasjonale dekningskart med arealestimater med vekt på klimagassen metan.
NILU
2021
Effects of rocket launches in Ny-Ålesund, 2018 - 2019. Observations of snow and air samples.
The report summarizes the results from additional snow sampling and regular monitoring activities in connection to the rocket launch in Ny-Ålesund 7 Dec 2018, 26 Nov 2019 and 10 Dec 2019 to document possible impacts on environment and on the monitoring activities in Ny-Ålesund. An enhanced deposition of aluminium (Al) and iron (Fe) on the local environment due to the rocket launch is observed.
NILU
2021
Potential use of CAMS modelling results in air quality mapping under ETC/ATNI
ir quality European-wide annual maps based on the Regression – Interpolation – Merging Mapping (RIMM) data fusion methodology have been regularly produced, using the Air Quality e-Reporting validated (E1a) monitoring data, the EMEP modelling data and other supplementary data. In this report, we examine the use of the preliminary (E2a) monitoring data as provided up-to-date (UTD) by many European countries and as also stored in the Air Quality e-Reporting database, together with the EMEP or the Copernicus Atmospheric Monitoring Service (CAMS) modelling data in two variants (i.e. CAMS Ensemble Interim Reanalysis and CAMS Ensemble Forecast) for potential preparing of preliminary spatial maps. With respect to the availability, the CAMS Ensemble Forecast is the most useful in the potential interim mapping. Such preliminary maps could be constructed approximately one year earlier than the validated maps. Even though we have demonstrated the feasibility, the mapping performance presented in the report is influenced by the lack of the E2a data in some areas.
Next to the evaluation of potential interim maps, regular RIMM maps based on the validated E1a measurement data using three different chemical transport model outputs have been compared, i.e. using the CAMS Ensemble Forecast, the CAMS Ensemble Interim Reanalysis and the EMEP model outputs. Based on the evaluation of the results presented, it is not possible to conclude that any of the three model datasets gives definitively better results compared to the others. The results do not provide strong reasons for a potential change of the model used in the regular mapping.
In addition, the RIMM mapping results have been compared with the CAMS Ensemble Forecast and the CAMS Ensemble Interim Reanalysis outputs. The comparison shows that the data fusion RIMM method gives better results, both in the rural and urban background areas, presumably because of the higher spatial resolution, introduction of additional ancillary data in the data fusion and not fully reduced bias in some data assimilation methods used in CAMS.
ETC/ATNI
2021
Development of Renewable Energy and its Impact on Air Quality. Co-benefits and Trade-Offs.
This study is an continuation of the work initiated in the European Topic Centre on Climate Change Mitigation and Energy (ETC/CME; report 2019/8) on the effect of the development of renewable energy sources (RES) since 2005 on emissions of anthropogenic air pollutants, which found that RES have led to an estimated increase of primary particulate matter emissions and a decrease of emissions of sulphur oxides and nitrogen oxides. The current study aims at evaluating the impact of these emission changes on air quality and human health by using the air quality model CHIMERE to understand the distribution of emissions. To this end, the emissions corresponding to a reference scenario and to different scenarios of development of renewable energy sources were spatialized over Europe based on the spatialization of emissions used within the Copernicus Atmosphere Monitoring Service (CAMS). The CHIMERE model was applied to calculate, for the year 2016, the impact of the different scenarios on air quality. Finally, the possible impact on human health was assessed. We also include a specific section devoted to residential emission spatialization techniques to review the related uncertainties.
According to the simulation results using emissions based on official data, significant increases of particulate matter concentrations exceeding 1 μg/m3 were found for some countries, linked primarily to the increase in residential wood burning when comparing 2005 with 2016. Exceptions were Portugal and Greece (two countries that decreased their use of biomass for heating). At the scale of the EU27+UK, in 2016, the interplay between emission increases due to biomass use and emission decreases due to all other RES growth is estimated to be responsible for around 9 200 premature deaths and 97 000 years of life lost. As such, the increase in solid biomass heating alone, (due particularly by the high emissions of fine particulate matter from domestic stoves), is estimated to be responsible for an increase of around 10 700 premature deaths and 113 000 years of life lost in 2016. These premature deaths could have been prevented by promoting the development of other RES than solid biomass heating.
Similar results were found at the European scale with simulations using emissions based on expert estimates but with strong differences according to the country. The differences are mostly due to differences in emissions that may not account for semi-volatile organic compounds for some countries. Excluding heating with biomass, all other RES use appears to have led to small reductions of particulate matter concentrations across the Union, with air quality benefits estimated at 1 600 avoided premature deaths and 16 000 prevented years of life lost in 2016. This is because the deployment of RES other than heating from solid biomass from 2005 to 2016 only lead to small changes in emissions of pollutants. However, these sources represented only 13% of the heating and electricity production in 2016.
ETC/ATNI
2021
Public awareness and efforts to improve air quality in Europe
Air pollution is the single largest environmental risk to the health of the Europeans and is receiving significant attention in the public space. It is comprehensively regulated in the EU, addressing air pollutants concentrations, as well as emissions from numerous sources. The legislation requires also for the authorities to inform the public.
In some cases, the authorities are struggling to implement measures to improve air quality and are met with barriers in the form of public opinion, for example, in cities. In other cases, citizens are taking action with the aim of pushing the authorities to improve air quality.
This report aims to reflect on what air quality information authorities provide and how the public perceives air quality and the information provided. It also looks on actions civil society takes towards improvements of air quality and the role of public awareness and understanding.
ETC/ATNI
2021
Norwegian Meteorological Institute
2020
Målinger av SO2 i omgivelsene til Elkem Carbon og REC Solar. Januar 2020 – desember 2020.
På oppdrag fra Elkem Carbon AS har NILU utført målinger av SO2 i omgivelsene til Elkem Carbon og REC Solar i Vågsbygd
(Kristiansand kommune). Bedriftene ble pålagt av Miljødirektoratet å gjennomføre SO2-målinger i omgivelsesluft.
Målingene ble utført med SO2-monitor i boligområdet på Fiskåtangen (Konsul Wilds vei) og med passive SO2-prøvetakere
ved 6 steder rundt bedriftene. Rapporten dekker målinger i perioden 1. januar 2020 – 31. desember 2020.
Norske grenseverdier for luftkvalitet (SO2) ble overholdt ved Konsul Wilds vei for alle midlingsperioder krevet i
forurensningsforskriften (årsmiddel, vintermiddel, døgnmiddel og timemiddel). De mest belastede stedene i måleperioden
var Konsul Wilds vei og Fiskåveien rett sør for bedriftene.
NILU
2021
The increase of the commercial availability of low-cost sensor technology to monitor atmospheric composition is contributing to the rapid adoption of such technology by both public authorities and self-organized initiatives (e.g. grass root movements, citizen science, etc.). Low-cost sensors (LCS) can provide real time measurements, in principle at lower cost than traditional monitoring reference stations, allowing higher spatial coverage than the current reference methods. However, data quality from LCS is lower than the one provided by reference methods. Also, the total cost of deploying a dense sensor network needs to consider the costs associated not only to the sensor platforms but also the costs associated for instance with deployment, maintenance and data transmission.
This report aims to give an overview of the current status of LCS technology in relation to commercialization, measuring capabilities and data quality, with especial emphasis on the challenges associated to the use of this novel technology, and the opportunities they open when correctly used.
NILU
2021
Målinger av PM10 i Lohavn. April og mai 2020.
NILU – Norsk institutt for luftforskning har på oppdrag fra HAV Eiendom utført målinger av svevestøv (PM10) i Lohavn i Oslo. Området skal utvikles til et nytt byområde med boliger, skole, utearealer og næring. PM-konsentrasjonen ble målt på tre steder i Lohavn for å kartlegge svevestøvkonsentrasjonen og mulige kilder. Måleprosjektet pågikk våren 2020. Mulige effekter av Covid-nedstengning, variasjoner i trafikkmengden i området og variasjoner av meteorologiske parametere på PM-konsentrasjonen er diskutert.
Måleresultatene viser lavere PM-konsentrasjon enn i måleperioden 2016/17. Årsaken var trolig bortfall av midlertidige kilder som førte til periodevis høye konsentrasjoner i 2016/17. De høyeste PM10-konsentrasjonene ble observert ved vind fra sør-sørvest (som dominerer på dagtid).
NILU
2021
2021
The report holds a comprehensive literature review on the non-exhaust PM emission from transport. All types of wear particles are considered (brake, tyre, road surface) and all modes (road, rail, aviation), with strong emphasis on road. The report serves as an input to review current emission inventories, summarizing the current emission estimates, the estimation methodologies, uncertainties and future trends, briefly zooming in on the relevance of electric vehicles. The report considers both air quality as well as the relevance of non-exhaust emission as a source of microplastics. To conclude, the report includes a brief overview of technological and policy options to reduce the environmental impact.
ETC/ATNI
2021
The report provides the annual update of the European air quality concentration maps and population exposure estimates for human health related indicators of pollutants PM10 (annual average, 90.4 percentile of daily means), PM2.5 (annual average), ozone (93.2 percentile of maximum daily 8-hour means, SOMO35, SOMO10) and NO2 (annual average), and vegetation related ozone indicators (AOT40 for vegetation and for forests) for the year 2018. The report contains also Phytotoxic ozone dose (POD) for wheat and potato maps and NOx annual average maps for 2018. The POD maps are presented for the first time in this regular mapping report. The trends in exposure estimates in the period 2005-2018 are summarized. The analysis is based on interpolation of annual statistics of the 2018 observational data reported by the EEA member and cooperating countries and other voluntary reporting countries and stored in the Air Quality e-reporting database. The mapping method is the Regression – Interpolation – Merging Mapping. It combines monitoring data, chemical transport model results and other supplementary data using linear regression model followed by kriging of its residuals (residual kriging). The paper presents the mapping results and gives an uncertainty analysis of the interpolated maps.
ETC/ATNI
2021
2021
This report presents a review of data assimilation methods applicable to air quality. In the introduction, we first describe a brief history of data assimilation method development in the context of numerical weather prediction (NWP), and then we highlight key differences when applying data assimilation methods to air quality prediction from NWP applications. Based on these differences, we outline a set of key requirements for data assimilation when applied to air quality. Following this, we review the available data assimilation algorithms and attempt to identify suitable data assimilation methods that could be applied with air quality models. This review and its findings form the basis of the developments to be carried out in the Urban Data Assimilation Systems project.
NILU
2021
- Aukra, Harøya, Fræna, Møre & Romsdal fylke, Ormen Lange
- Oljeindustri, prosessanlegg, miljøovervåking
- Luftforurensing, nitrogengjødsling, eutrofiering, forsuring
- Vegetasjon, artssammensetning, nedbørsmyr, kystlynghei
- Plantekjemi, jordanalyser, jordvannanalyser, tungmetaller, gjenanalyserAukra, Harøya, Fræna, Møre & Romsdal county, Ormen Lange
- Oil industry, process plant, environmental monitoring
- Air pollution, nitrogen fertilization, eutrophication, acidification
- Vegetation, species composition, bogs, heathland
- Plant chemistry, soil analyses, ground water analyses, heavy
metals, re-analyses
Norsk institutt for naturforskning (NINA)
2021
Method for high resolution emission estimations from construction sites. Phase I: Mapping input data
This report presents the results from exploring the available input data to develop a model for estimating air pollutants and GHG-emissions based on a bottom-up approach, including both exhaust and non-exhaust emissions. The availability of
reliable input data is the limiting factor and the most critical part of designing such a bottom-up approach. In this study, we have focussed on assessing input data that allow defining; i) the exact location and area affected during building and construction; ii) the starting and finalization dates; iii) the type of construction activity; iv) the non-road mobile machinery (NRMM) activity within building and construction; v) roads in the vicinity of construction sites.
NILU
2021
This report details the methodology and assumptions for the ETC/CME report: A life cycle perspective on the benefits of renewable electricity generation. In that report, gross avoided potential environmental impacts are estimated for electricity production in the EU-27 in the period 2005-2018. Avoided potential impacts are calculated by comparing the actual data with a counterfactual scenario where electricity production from Renewable Energy Sources is frozen at 2005 levels.
The overall methodological approach to the study is described in this report together with a short mathematical treatment of the calculation of life cycle indicators and subsequent scaling up to produce the two scenarios required to estimate gross avoided potential impacts. A short overview of data sources used in the study is included as well as a discussion and recommendations for the future.
ETC/CME
2020