Fant 2611 publikasjoner. Viser side 21 av 262:
2023
In order to measure progress towards the aims outlined by the United Nations (UN) 2030 Agenda, data are needed for the different indicators that are linked to each UN Sustainable Development Goal (SDG). Where statistical or scientific data are not sufficient or available, alternative data sources, such as data from citizen science (CS) activities, could be used.
Statistics Norway, together with the Norwegian Association of Local and Regional Authorities, have developed a taxonomy for classifying indicators that are intended to measure the SDGs. The purpose of this taxonomy is to sort, evaluate, and compare different SDG indicators and to assess their usefulness by identifying their central properties and characteristics. This is done by organizing central characteristics under the three dimensions of Goal, Perspective, and Quality. The taxonomy is designed in a way that can help users to find the right indicators across sectors to measure progress towards the SDGs depending on their own context and strategic priorities. The Norwegian taxonomy also offers new opportunities for the re-use of data collected through CS activities. This paper presents the taxonomy and demonstrates how it can be applied for an indicator based on a CS data set, and we also suggest further use of CS data.
Ubiquity Press
2023
Low-Processing Data Enrichment and Calibration for PM2.5 Low-Cost Sensors
Particulate matter (PM) in air has been proven to be hazardous to human health. Here we focused on analysis of PM data we obtained from the same campaign which was presented in our previous study. Multivariate linear and random forest models were used for the calibration and analysis. In our linear regression model the inputs were PM, temperature and humidity measured with low-cost sensors, and the target was the reference PM measurements obtained from SEPA in the same timeframe.
2023
Soil uptake of VOCs exceeds production when VOCs are readily available
Volatile organic compounds (VOCs) are reactive gaseous compounds with significant impacts on air quality and the Earth's radiative balance. While natural ecosystems are known to be major sources of VOCs, primarily due to vegetation, soils, an important component of these ecosystems, have received relatively less attention as potential sources and sinks of VOCs. In this study, soil samples were collected from two temperate ecosystems: a beech forest and a heather heath, and then sieved, homogenized, and incubated under various controlled conditions such as different temperatures, oxic vs. anoxic conditions, and different ambient VOC levels. A dynamic flow-through system coupled to a proton transfer reaction-time of flight-mass spectrometry (PTR-ToF-MS) was used to measure production and/or uptake rates of selected VOCs, aiming to explore the processes and their controlling mechanisms. Our results showed that these soils were natural sources of a variety of VOCs, and the strength and profile of these emissions were influenced by soil properties (e.g. moisture, soil organic matter), oxic/anoxic conditions, and temperature. The soils also acted as sinks for most VOCs when VOC substrates at parts per billions levels (ranging between 0.18 and 68.65 ppb) were supplied to the headspace of the enclosed soils, and the size of the sink corresponded to the amount of VOCs available in the ambient air. Temperature-controlled incubations and glass bead simulations indicated that the uptake of VOCs by soils was likely driven by microbial metabolism, with a minor contribution from physical adsorption to soil particles. In conclusion, our study suggests that soil uptake of VOCs can mitigate the impact of other significant VOC sources in the near-surface environment and potentially regulate the net exchange of these trace gases in ecosystems.
Elsevier
2023
Safety-by-design and engineered nanomaterials: the need to move from theory to practice
As the governance of engineered nanomaterials (ENMs) evolves, innovations in the prevention, mitigation, management, and transfer of risk shape discussion of how nanotechnology may mature and reach various marketplaces. Safety-by-Design (SbD) is one leading concept that, while equally philosophy as well as risk-based practice, can uniquely help address lingering uncertainties and concerns stemming from regulatory evaluation of ENM risk across worker, consumer, and environmental safety. This paper provides a discussion on the SbD concept across different disciplines aiming to identify different approaches and needs to meet regulatory requirements—ultimately, we argue that SbD is evolving both to meet the needs and discourse of various disciplines, and to apply within differing marketplaces and national regulatory structures. Understanding how SbD has evolved within ENM can yield a more practical application and development of SbD, and help guide or unify national and international ENM governance around a core set of safety-driven principles.
Springer
2023
Aerosol Optical Properties and Type Retrieval via Machine Learning and an All-Sky Imager
This study investigates the applicability of using the sky information from an all-sky imager (ASI) to retrieve aerosol optical properties and type. Sky information from the ASI, in terms of Red-Green-Blue (RGB) channels and sun saturation area, are imported into a supervised machine learning algorithm for estimating five different aerosol optical properties related to aerosol burden (aerosol optical depth, AOD at 440, 500 and 675 nm) and size (Ångström Exponent at 440–675 nm, and Fine Mode Fraction at 500 nm). The retrieved aerosol optical properties are compared against reference measurements from the AERONET station, showing adequate agreement (R: 0.89–0.95). The AOD errors increased for higher AOD values, whereas for AE and FMF, the biases increased for coarse particles. Regarding aerosol type classification, the retrieved properties can capture 77.5% of the total aerosol type cases, with excellent results for dust identification (>95% of the cases). The results of this work promote ASI as a valuable tool for aerosol optical properties and type retrieval.
MDPI
2023
Impact of 2020 COVID-19 lockdowns on particulate air pollution across Europe
To fight against the first wave of coronavirus disease 2019 (COVID-19) in 2020, lockdown measures were implemented in most European countries. These lockdowns had well-documented effects on human mobility. We assessed the impact of the lockdown implementation and relaxation on air pollution by comparing daily particulate matter (PM), nitrogen dioxide (NO2) and ozone (O3) concentrations, as well as particle number size distributions (PNSDs) and particle light absorption coefficient in situ measurement data, with values that would have been expected if no COVID-19 epidemic had occurred at 28 sites across Europe for the period 17 February–31 May 2020. Expected PM, NO2 and O3 concentrations were calculated from the 2020 Copernicus Atmosphere Monitoring Service (CAMS) ensemble forecasts, combined with 2019 CAMS ensemble forecasts and measurement data. On average, lockdown implementations did not lead to a decrease in PM2.5 mass concentrations at urban sites, while relaxations resulted in a +26 ± 21 % rebound. The impacts of lockdown implementation and relaxation on NO2 concentrations were more consistent (−29 ± 17 and +31 ± 30 %, respectively). The implementation of the lockdown measures also induced statistically significant increases in O3 concentrations at half of all sites (+13 % on average). An enhanced oxidising capacity of the atmosphere could have boosted the production of secondary aerosol at those places. By comparison with 2017–2019 measurement data, a significant change in the relative contributions of wood and fossil fuel burning to the concentration of black carbon during the lockdown was detected at 7 out of 14 sites. The contribution of particles smaller than 70 nm to the total number of particles significantly also changed at most of the urban sites, with a mean decrease of −7 ± 5 % coinciding with the lockdown implementation. Our study shows that the response of PM2.5 and PM10 mass concentrations to lockdown measures was not systematic at various sites across Europe for multiple reasons, the relationship between road traffic intensity and particulate air pollution being more complex than expected.
2023
Leveraging opportunity of low carbon transition by super-emitter cities in China
Chinese cities are core in the national carbon mitigation and largely affect global decarbonisation initiatives, yet disparities between cities challenge country-wide progress. Low-carbon transition should preferably lead to a convergence of both equity and mitigation targets among cities. Inter-city supply chains that link the production and consumption of cities are a factor in shaping inequality and mitigation but less considered aggregately. Here, we modelled supply chains of 309 Chinese cities for 2012 to quantify carbon footprint inequality, as well as explored a leverage opportunity to achieve an inclusive low-carbon transition. We revealed significant carbon inequalities: the 10 richest cities in China have per capita carbon footprints comparable to the US level, while half of the Chinese cities sit below the global average. Inter-city supply chains in China, which are associated with 80% of carbon emissions, imply substantial carbon leakage risks and also contribute to socioeconomic disparities. However, the significant carbon inequality implies a leveraging opportunity that substantial mitigation can be achieved by 32 super-emitting cities. If the super-emitting cities adopt their differentiated mitigation pathway based on affluence, industrial structure, and role of supply chains, up to 1.4 Gt carbon quota can be created, raising 30% of the projected carbon quota to carbon peak. The additional carbon quota allows the average living standard of the other 60% of Chinese people to reach an upper-middle-income level, highlighting collaborative mechanism at the city level has a great potential to lead to a convergence of both equity and mitigation targets.
2023
NORMAN guidance on suspect and non-target screening in environmental monitoring
Increasing production and use of chemicals and awareness of their impact on ecosystems and humans has led to large interest for broadening the knowledge on the chemical status of the environment and human health by suspect and non-target screening (NTS). To facilitate effective implementation of NTS in scientific, commercial and governmental laboratories, as well as acceptance by managers, regulators and risk assessors, more harmonisation in NTS is required. To address this, NORMAN Association members involved in NTS activities have prepared this guidance document, based on the current state of knowledge. The document is intended to provide guidance on performing high quality NTS studies and data interpretation while increasing awareness of the promise but also pitfalls and challenges associated with these techniques. Guidance is provided for all steps; from sampling and sample preparation to analysis by chromatography (liquid and gas—LC and GC) coupled via various ionisation techniques to high-resolution tandem mass spectrometry (HRMS/MS), through to data evaluation and reporting in the context of NTS. Although most experience within the NORMAN network still involves water analysis of polar compounds using LC–HRMS/MS, other matrices (sediment, soil, biota, dust, air) and instrumentation (GC, ion mobility) are covered, reflecting the rapid development and extension of the field. Due to the ongoing developments, the different questions addressed with NTS and manifold techniques in use, NORMAN members feel that no standard operation process can be provided at this stage. However, appropriate analytical methods, data processing techniques and databases commonly compiled in NTS workflows are introduced, their limitations are discussed and recommendations for different cases are provided. Proper quality assurance, quantification without reference standards and reporting results with clear confidence of identification assignment complete the guidance together with a glossary of definitions. The NORMAN community greatly supports the sharing of experiences and data via open science and hopes that this guideline supports this effort.
Springer
2023
Marine mammals are considered sentinel species and may act as indicators of ocean health. Plastic residues are widely distributed in the oceans and are recognised as hazardous contaminants, and once ingested can cause several adverse effects on wildlife. This study aimed to identify and characterise plastic ingestion in the Guiana dolphins (Sotalia guianensis) from the Southwestern Tropical Atlantic by evaluating the stomach contents of stranded individuals through KOH digestion and identification of subsample of particles by LDIR Chemical Imaging System. Most of the individuals were contaminated, and the most common polymers identified were PU, PET and EVA. Microplastics were more prevalent than larger plastic particles (meso- and macroplastics). Smaller particles were detected during the rainy seasons. Moreover, there was a positive correlation between the stomach content mass and the number of microplastics, suggesting contamination through trophic transfer.
Elsevier
2023